top of page

LPKF MicroLine 5000

UV Laser System for Laser Drilling and Contour Cutting


LPKF MicroLine 5000

The MicroLine 5000 is a laser drilling and cutting system specifically tailored to the needs of the flexible circuit industry. With the ability to drill holes down to 20 μm, a variety of both organic and inorganic substrates can be processed such as:

  • Flexible PCBs

  • IC substrates

  • High Density Interconnect PCBs

Common applications of the laser drilling machine include through holes and blind vias, with the additional ability to cut large mounting holes, or full perimeter cuts of irregular board contours.

Quality and Precision

The high-quality attributes of the UV wavelength allow for the laser drilling and cutting of delicate materials with minimal heat affected zone - and the proof is in the results: clean side-walls with precise dimensions and virtually zero debris. Available with either a 10 W, 15 W or 27 W laser source, the MicroLine 5000 series may also be configured to work with various material handling options.

Contour Cutting

The MicroLine 5000 UV laser is a universal tool - and thus suitable for cutting all industry-standard panel sizes with dimensions of up to 533 mm x 610 mm (21” x 24”). The 20 μm high quality UV laser kerf width allows for cutting of even the most delicate contours at high speeds.

Process Monitoring

The MicroLine 5000 systems are equipped with an integrated vision system for fast fiducial recognition, ensuring accurate alignment. The camera’s ability to use virtually any board feature as a fiducial alignment point provides operator flexibility from job to job.

Technical Data

LPKF MicroLine 5000 - Laser class1


Max. working area
(X x Y x Z)533 mm x 610 mm x 11 mm
(21” x 24” x 0.43”)

Max. sheet size; 
max. reel width533 mm x 610 mm (21” x 24”);
500 mm (19.6”)

Position accuracy± 20 μm (0.8 Mil)

Diameter of focussed laser beam 20 μm (0.8 Mil)

Laser wave length 355 nm

System dimensions (W x H x D)

1 660 mm x 1 720 mm x 1 900 mm
(66” x 68” x 75”)*


~ 2 000 kg (~ 4 400 lbs)

Operating conditions

Power supply

400 VAC, 3-phase, 50-60 Hz, 16 A, 6.5 kVA


Air-cooled (internal water-air cooling)

Ambient temperaturey

22 °C ± 2 °C (71.6 °F ± 4 °F)

Compressed air

130 l/min @ 0.6 MPa, air quality ISO 8573-1:2010, class 6.4.4

Required accessories

Fume extraction and filtration unit



bottom of page